|
TI-1000SS Digital Indicator
With Cattle Motion Program
|
The TI-1000SS is a general purpose low cost digital indicator
with a NEMA 4x stainless steel enclosure for use in washdown
environments. It comes with an oversize (1") LCD screen for
easy readout of up to 5,000 display divisions, and supplies enough
current for up to 4-350W load cells.
The primary and secondary displayed units may be altered to fit
the required application. All setup parameters may be entered via
the front panel keys, including calibration.
The TI-1000SS uses full duplex RS-232 serial format for
communication with many types of attached support equipment. The
unit can transmit data on demand, or continuously in a popular
data protocol to match a wide variety of printers, remote
displays, or personal computers. Wiring diagrams to connect extra
equipment will be found on page 2 of this manual.
The setup parameters are altered through the Setup menu. A
graphical road map of the Setup menu is found on page 3 of the
manual. The Configuration section of the manual, found on page 2,
explains how to enter the Setup menu. In this mode, the five front
panel keys become directional navigators to maneuver and save
settings.
|
Specifications
|
Full Scale Input Signal
|
30V, including dead load
|
|
Input Impedance
|
30MW , typical
|
|
Internal Resolution
|
Approximately 100,000 counts
|
|
Display Resolution
|
5,000 dd
|
|
Measurement Rate
|
10 Meas/sec
|
|
System Linearity
|
Within 0.02% if FS
|
|
Calibration Method
|
Software Calibration, with long term storage in
EERPROM
|
|
Excitation Voltage
|
+5VDC, 4 x 350W load
cells
|
|
RFI Protection
|
Signal and excitation lines protected by LC Low
Pass Filter
|
DIGITAL SPECIFICATIONS
|
Microcomputer
|
Intel 80C32
|
|
| |
Program Memory:
|
32K x 8, external to m
C
|
| |
SCRAM:
|
8K x 8, external to m
C
|
| |
EEPROM:
|
64 x 16, external to m
C
|
|
Digital Filtering
|
Software selectable
|
|
SERIAL COMMUNICATIONS
|
Printer Port
|
Full duplex at 1200, 2400, 4800, or 9600 Baud.
Data bits and parity selectable
|
OPERATOR INTERFACE
|
Display
|
1" (25.4mm) 7-segment, Liquid Crystal, 4½
Digit
|
|
Additional Symbols
|
Net, Gross, kg, neg weight
|
|
Keyboard
|
5-key flat membrane panel
|
POWER
|
AC Adapter
|
12 VDC @ 800mA
|
|
Power Consumption
|
110mA, with 4 x 350W
load Cells
|
|
Pricing: $718.00 CDN, $449.00 USD
+ Taxes & Shipping
Currency
Converter
|
|
Davco Weight Scales Inc.
P.O. Box 4104
Quesnel, British Columbia, Canada
V2J 3J2
Toll Free 1-877-747-8371
Phone 1-250-747-8371, Fax 1-250-747-8372
All contents of this site ©1999-2003 Davco Weight
Scales Inc
|
